 |
|
|
| Hull and Deck |
|
| • |
Lloyd's approved, end-grained balsa construction using bi-axial and unidirectional E-glass for optimum strength. Interplastic vinylester resin for a ten year hull blister warranty. |
|
| • |
Innovative, lightweight and strong hull/deck joint bonded with 3M polyurethane elastomer bonding agent and finished with 3M 5200. |
|
| • |
White gel coat hull with tapered molded boot stripe and J logo decal on aft hull corners. |
|
| • |
Large open racing cockpit with raised 2" coaming, low profile mainsheet traveler on plastic spacers for better drainage, high traction non-skid and optimized hardware layout. |
|
| • |
Large companionway opening with light weight molded seahood and curved slider. |
|
| • |
GRP molded main structural bulkhead, bonded to hull and deck providing superior support for shroud chainplates, and optimum hull and deck stiffness. |
|
| • |
Individually bonded light-weight structural bulkheads. |
|
| • |
Individually bonded FRP fiberglass structural keel support grid. |
|
| • |
Aluminum mast step i-beam with transverse beams fastened to main bulkhead
and structural support grid. Lead and antimony fixed 5.9' draft bulb keel
for low GG, bolted, epoxy bonded and glass wrapped to deep reinforced structural
hull stub. |
|
| • |
1 1/4" teak toe rails on foredeck. |
|
| |
|
|
| Propulsion and Steering |
|
| • |
Yanmar 9 h.p. diesel engine with water, dirt, and fuel filters. |
|
| • |
Engine instrument panel in cockpit with tachometer and alarms for oil
pressure and temperature. |
|
| • |
Balanced, light weight, high aspect spade rudder with carbon fiber shaft
turning on two Harken rudder bearings. |
|
| • |
Varnished, curved and laminated mahogony tiller with stainless steel
straps and Spinlock adjustable hiking handle. |
|
| • |
Light weight, low profile, stainless rudder head fitting. |
|
| • |
Twelve gallon fuel tank with inspection port, gauge and shut-off valve. |
|
| • |
Martec 13 x 11 folding bronze propeller with 3/4" Aquamet stainless
steel shaft and molded custom strut. |
|
| |
|
|
| Deck Hardware and Running Rigging |
|
| • |
Two Harken 40.2A two-speed primary cockpit winches. |
|
| • |
Two Harken 32.2A two-speed secondary winches for halyards, reef lines
and spinnaker sheeting. |
|
| • |
Antal mast base halyard stand-up blocks. |
|
| • |
Antal Master Series stoppers mounted forward of secondary winches. |
|
| • |
Two 3" x 1" clear anodized jib tracks. |
|
| • |
Two 3" x 1" genoa tracks (shipped loose). |
|
| • |
Two Schaefer jib lead blocks with stainless cars. |
|
| • |
Harken mid-range adjustable mainsheet traveler system on cockpit sole
with 3:1 control line purchase. |
|
| • |
Harken 1541 mid-range blocks mounted on aft u-bolt and mid-range hexaratchet
blocks mounted on stanchions for spinnaker sheet leads. |
|
| • |
Three rear anodized aluminum mooring cleats. |
|
| • |
Lewmar 19" x 19" bronze Ocean Series hatch for quick deck
storage, interior ventilation and light. |
|
| • |
Lexan companionway drop board with inside/outside opening, lockable
stainless hasp. |
|
| • |
Two single 10" Antal aluminum lock-in winch handles with roller
bearing handles. |
|
| • |
Henderson cockpit operated bilge pump. |
|
| • |
Two PVC winch handle holders. |
|
| • |
Two plastic cowl vents for bow & stem. |
|
| • |
Double white PVC coated lifelines. |
|
| • |
Custom stainless stern head fitting. |
|
| • |
Stainless split stern rail with center gate. |
|
| |
|
|
| Spars and Standing Rigging |
|
| • |
Hall Spars 152 6061-T6 aluminum mast section, with tapered upper panel,
double tapered spreaders, welded masthead crane, internal halyards, wire
halyard exits with stainless steel chafe bars, cast aluminum mast shoe,
mast collar with custom fit boot and wedges. Mast and boom finished with
off-white awlgrip. |
|
| • |
Stainless 1x19 wire headstay, upper, lower and intermediate shrouds
with open body adjustable turnbuckles and backstay. |
|
| • |
Main halyard of 7x19 stainless wire spliced to 3/8" XLS white code
dacron tail with headboard shackle. |
|
| • |
Jib halyard of 7x19 stainless wire with Nicro snap shackle spliced to
3/8" XLS solid blue code dacron tail. |
|
| • |
Cockpit line storage bags. |
|
| • |
Harken Model 0 roller furler. |
|
| • |
Spinnaker halyard of 3/8" XLS solid blue code dacron with Nicro
snap shackle. |
|
| • |
Bow Split retrieval system of 5/16" shock cord and Harken blocks.
5/16" XLS blue code dacron sprit control line leading from below decks
to cockpit mounted Harken 150 cam cleat on cabin trunk. |
|
| • |
Spinnaker tack line of 3/8" XLS red code with whipped ends leading
to Harken cam cleat aft to starboard on cabin trunk just above the pole
control camcleat. |
|
| • |
Spinnaker twing adjusters leading to cockpit. |
|
| • |
Double ended 24:1 Harken adjustable cascading backstay purchase with
5/16" XLS solid red braid leading to Harken 150 cam cleats on cockpit
well to port and starboard. |
|
| • |
4:1 Harken double ended cunningham purchase with stainless grommet hook,
5/16" solid red control line and vinyl coated wire strop leading to
cam cleats on forward corners of seahood. |
|
| • |
8:1 Harken boom vang system with 3/8" XLS white with blue fleck
control line. |
|
| • |
Harken hexaratchet 6:1 mainsheet system inducing swivel base cam and
dual boom bales. |
|
| • |
Stainless steel chainplates for shrouds and backstay bolted to main
bulkhead and transom. |
|
| • |
Main boom with one reef line, 6:1 internal outhaul tackle, welded vang
lug, gooseneck and fitting with tack reef hooks and reef cleat. |
|
| |
|
|
| Interior |
|
| • |
Varnished, removable teak and holly cabin sole. |
|
| • |
Molded settee berths with access panels to storage under. |
|
| • |
Large forward v-berth platform with two access panels above mast step
and instrument through hull area with inspection port. |
|
| • |
Stainless companionway entrance ladder with two teak steps permitting
an outboard engine and cooler to be stored aft. |
|
| • |
Removable access port in bulkhead aft of settee berths. |
|
| • |
Low maintenance molded interior finish with teak and holly varnished
sole, and easy to clean off-white interior bulkheads. |
|
| • |
6'-5" main cabin settees with comfort molded backrests and shelf
with teak fiddle. |
|
| • |
Choice of standard cushion colors on main cabin settees. |
|
| • |
Storage compartments below settees. |
|
| • |
Stainless companionway ladder with teak treads. |
|
| • |
48 quart carry-off Rubbermaid cooler with positive tie down system. |
|
| • |
Storage bin area to port, forward of settees, with 15" wide counter. |
|
| • |
Raritan Head with Y-valve discharge and holding tank. |
|
| • |
Storage bin to starboard. |
|
| |
|
|
| Electrical |
|
| • |
Two dome light fixtures. |
|
| • |
Deep cycle battery with Guest battery switch. |
|
| • |
Vetus electrical panel with six breakers. |
|
| • |
Navigation bow and stern lights, and steaming light. |
|
| • |
Lightning bonding system to ABYC specification. |
|
| |
|
|
| Graphics (optional) |
|
| • |
Contrasting non-skid color on white deck. |
|
| • |
Other hull colors upon request. |
|
| • |
Additional hull stripes. |
|
| |
|
|
| Forepeak Group (optional) |
|
| • |
Removable forepeak with cushions. |
|
| • |
Privacy curtain. |
|
| • |
Two swivel lights. |
|
| |
|
|
| Head Detailing Group (optional) |
|
| • |
Main bulkhead door. |
|
| • |
Head swivel light. |
|
| • |
Sink hardware and collapsing 5 gallon tanks. |
|
| • |
Hanging locker. |
|
| |
|
|
| Galley Group (optional) |
|
| • |
Main cabin teak table. |
|
| • |
Single burner non-pressurized alcohol stove. |
|
| • |
Storage drawer. |
|
| • |
Stainless sink with whale spigot and hand pump, plus a five gallon collapsible
fresh water tank. |
|
| |
|
|
| Single Options (optional) |
|
| • |
Main cabin opening ports. |
|
| • |
Swim ladder. |
|
| • |
Thurston cockpit dodger. |
|
| • |
Padded cockpit lifeline covers (4 per set). |
|
| • |
Utility storage drawer. |
|
| • |
Main cabin storage bag set. |
|
